Tuning Epoxy Thermomechanics via Thermal Isomerization: A Route to Negative Coefficient of Thermal Expansion Materials.

Fine control over the thermal expansion and contraction behavior of polymer materials is challenging. Most polymers have large coefficients of thermal expansion (CTEs), which preclude long performance lifetimes of composite materials. Herein, we report the design and synthesis of epoxy thermosets with low CTE values below their Tg and large contraction behavior above Tg by incorporating thermally contractile dibenzocyclooctane (DBCO) motifs within the thermoset network. This atypical thermomechanical behavior was rationalized in terms of a twist-boat to chair conformational equilibrium of the DBCO linkages. We anticipate these findings to be generally useful in the preparation of materials with designed CTE values.

Selectively Depolymerizable Polyurethanes from Unsaturated Polyols Cleavable by Olefin Metathesis.

This communication describes a novel series of linear and crosslinked polyurethanes (PUs) and their selective depolymerization under mild conditions. Two unique polyols are synthesized bearing unsaturated units in a configuration designed to favor ring-closing metathesis (RCM) to five- and six-membered cycloalkenes. These polyols are co-polymerized with toluene diisocyanate to generate linear PUs and trifunctional hexamethylene- and diphenylmethane-based isocyanates to generate crosslinked PUs. The polyol design is such that the RCM reaction cleaves the backbone of the polymer chain. Upon exposure to dilute solutions of Grubbs' catalyst under ambient conditions, the PUs are rapidly depolymerized to low molecular weight, soluble products bearing vinyl and cycloalkene functionalities. These functionalities enable further re-polymerization by traditional strategies for polymerization of double bonds. It is anticipated that this general approach can be expanded to develop a range of chemically recyclable condensation polymers that are readily depolymerized by orthogonal metathesis chemistry.

Screening metal-organic frameworks for selective noble gas adsorption in air: effect of pore size and framework topology.

The adsorption of noble gases and nitrogen by sixteen metal-organic frameworks (MOFs) was investigated using grand canonical Monte Carlo simulation. The MOFs were chosen to represent a variety of net topologies, pore dimensions, and metal centers. Three commercially available MOFs (HKUST-1, AlMIL-53, and ZIF-8) and PCN-14 were also included for comparison. Experimental adsorption isotherms, obtained from volumetric and gravimetric methods, were used to compare krypton, argon, and nitrogen uptake with the simulation results. Simulated trends in gas adsorption and predicted selectivities among the commercially available MOFs are in good agreement with experiment. In the low pressure regime, the expected trend of increasing adsorption with increasing noble gas polarizabilty is seen. For each noble gas, low pressure adsorption correlates with several MOF properties, including free volume, topology, and metal center. Additionally, a strong correlation exists between the Henry's constant and the isosteric heat of adsorption for all gases and MOFs considered. Finally, we note that the simulated and experimental gas selectivities demonstrated by this small set of MOFs show improved performance compared to similar values reported for zeolites.

Synthesis and characterization of ionic liquids containing copper, manganese, or zinc coordination cations.

Copper-, manganese-, and zinc-based ionic liquids (Cu{NH(2)CH(2)CH(2)OH}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (2), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CH(3)(CH(2))(3)CH(C(2)H(5))CO(2)](2) (3A), Cu{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (3B), Cu{NH(CH(2)CH(2)OH)(2)}(6)[(CF(3)SO(2))(2)N](2) (3C), Mn{NH(CH(2)CH(2)OH)(2)}(6)[CF(3)SO(3)](2) (4), and Zn{NH(2)CH(2)CH(2)OH}(6)[CF(3)SO(3)](2) (5)) are synthesized in a single-step reaction. Infrared data suggest that ethanolamine preferentially coordinates to the metal center through the amine group in 2 and the hydroxyl group in 5. In addition, diethanolamine coordinates through the amine group in 3A, 3C, and 4 and the hydroxyl group in 3B. The compounds are viscous (>1000 cP) at room temperature, but two (3C and 4) display specific conductivities that are reasonably high for ionic liquids (>20 mS cm(-1)). All of the compounds display a glass transition (T(g)) below -50 °C. The cyclic voltammograms (CVs) of 2, 3A, 3B, and 3C display a single quasi-reversible wave associated with Cu(II)/Cu(I) reduction and re-oxidation while 5 shows a wave attributed to Zn(II)/Zn(0) reduction and stripping (re-oxidation). Compound 4 is the first in this new family of transition metal-based ionic liquids (MetILs) to display reversible Mn(II)/Mn(III) oxidation and re-reduction at 50 mV s(-1) using a glassy carbon working electrode.

Synthesis of an ionic liquid with an iron coordination cation.

An iron-based ionic liquid, Fe((OHCH(2)CH(2))(2)NH)(6)(CF(3)SO(3))(3), is synthesized in a single-step complexation reaction. Infrared and Raman data suggest NH(CH(2)CH(2)OH)(2) primarily coordinates to Fe(iii) through alcohol groups. The compound has T(g) and T(d) values of -64 degrees C and 260 degrees C, respectively. Cyclic voltammetry reveals quasi-reversible Fe(iii)/Fe(ii) reduction waves.

A parallel colorimetric method for the rapid discovery and optimization of heterogeneous hydrodesulfurization catalysts.

A spectrophotometric based, parallel approach to screen heterogeneous catalysts for hydrodesulfurization has been developed. The method utilizes optical changes resulting from the hydrodesulfurization of 1,1'-binaphthothiophene to 1,1'-binaphthyl to determine catalyst activity. Hydrodesulfurization of 1,1'-binaphthothiophene to 1,1'-binaphthyl results in a loss of conjugation in the binaphthyl ring system. This results in a blue shift of more than 60 nm in the UV-vis spectrum. Since only small amounts of the HDS catalyst and 1,1'-binaphthothiophene are required, a large number of catalysts may be screened simultaneously. The synthesis of the 1,1'-binaphthothiophene and conditions for HDS catalyst screening are described.

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis.

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).